Alternate header for print version

Display image description
Maximum intensity projection through an optical section series of intracellularly injected protoplasmic astrocytes (green) in the molecular layer of the dentate gyrus that has been immunolabeled for the tyrosine kinase receptor Eph4a (red).
Full resolution image description
Tiff series of merged channels.
1024, 1024, 100

Image 2D
Display image description
Single optical section through protoplasmic astrocytes injected with Lucifer Yellow in the molecular layer of the dentate gyrus. The preparations were also counterstained with antibodies against Eph4a. The red indicates areas of saturated pixels.
Full resolution image description
Zip file containing the optical section series for the Lucifer Yellow injected astrocytes (2as_ly.pic) and the Eph4a staining (2as_Eph.pic) in separate files.

Attribution Only: This image is licensed under a Creative Commons Attribution License. View License Deed | View Legal Code

CCDB:3572*  Cite 
Project: P1231
Project name
Laminar Boundaries
Relationship between astrocyte distribution & morpholgy and laminar boundaries in the dentate gyrus
Funding agency
National Institutes of Health
Eric Bushong
Maryann Martone
Mark Ellisman
Start date
End date
Experiment ID
To determine the relationship of astrocytes in the dentate gyrus to boundaries revealed by immunostaining with Eph4a
Eric Bushong
Microscopy product
Microscopy product ID
BioRad 1024 MRC confocal
Microscopy type
laser scanning confocal
Product type
Image basename
Spatial Axis Image Size Pixel Size
X 1024px
Y 1024px
Scientific name
rattus norvegicus
30 days
Age class
Tissue section
Anatomical location
anterior hippocampus
100 µm
Specimen description
central nervous system
Cell type
protoplasmic astrocyte
Imaging parameters
Light microscopy product
Immersion medium
Mounting medium
Lens magnification
Numerical aperture
Specimen preparation
Protocol used
MaterialsThe rabbit anti-EphA4 antibody recognizing the 11 carboxy-terminal amino acids of chicken EphA4 was generously provided by Dr. Elena Pasquale (The Burnham Institute, La Jolla, CA). The production and specificity of the antibody were previously described (Soans et al., [1994]). The monoclonal anti-S100 antibody was purchased from Sigma (St. Louis, MO). The rat anti-N-CAM monoclonal antibody (isoclone 12F11) was obtained from BD PharMingen (San Diego, CA). Fluorescein isothiocyante (FITC)-conjugated donkey anti-rabbit, Cy5-conjugated donkey anti-mouse, and Cy5-conjugated goat anti-rabbit antibodies were purchased from Jackson ImmunoResearch (West Grove, PA). AlexaFluor 568 hydrazide and AlexaFluor 568- and 488-conjugated goat anti-rat and anti-mouse secondary antibodies (highly cross-absorbed) were obtained from Molecular Probes (Eugene, OR). Dilithium salt of Lucifer Yellow CH (LY) was purchased from Calbiochem (La Jolla, CA).Intracellular labeling of astrocytes with fluorescent dyesIntracellular injection of astrocytes in lightly fixed tissue slices was performed as previously described, with some modifications (Buhl et al., [1990]). Male Sprague-Dawley rats, 1 month old, were deeply anesthetized with Nembutal (10 mg/100 g body weight). The animals were transcardially perfused with oxygenated Ringer's solution at 37C (0.79% NaCl, 0.038% KCl, 0.02% MgCl2 6H2O, 0.018% Na2HPO4, 0.125% NaHCO3, 0.03% CaCl2 2H2O, 0.2% dextrose, 0.02% xylocaine), followed by 4% paraformaldehyde (PFA) in PBS (pH 7.4, 37C) for 8-10 minutes. The brain was placed in ice-cold PBS and cut into coronal slices with a vibratome at a thickness of 100 m. The slices were stored in PBS at 4C until used.The slices were placed under a 60 water objective (NA 1.4) and observed with an Olympus BX50WI microscope using infrared-DIC optics (Olympus, Melville, NY). Astrocytes in the upper blade of the dentate gyrus were identified by the shape and size of their somata. Glass micropipettes (OD 1.00 mm, ID 0.58 mm; resistances 100-400 M) were pulled on a vertical puller (David Kopf Instruments, Tujunga, CA) and backfilled with either 5% aqueous LY or 10 mM AlexaFluor 568 in 200 mM KCl. Astrocytes were impaled and iontophoretically injected with dye using 1-second pulses of negative current (0.5 Hz) for 1-2 minutes. After several cells were filled, the slices were placed in ice-cold 4% PFA for at least 1 hour. The slices were then ready to be immunolabeled.ImmunohistochemistryFor S100 double-labeling with EphA4 or N-CAM, a 1-month-old male Sprague-Dawley rat was perfused as described above, except that the 4% PFA was perfused for 20 minutes. Vibratome slices were cut coronally at a thickness of 75 m. These slices and slices containing dye-filled astrocytes were immunolabeled as described below, with all steps performed at 4C.Slices were washed three times for 10 minutes each in PBS. The slices were incubated for 1 hour in blocking solution (PBS containing 3% normal goat serum, 1% cold water fish gelatin, 0.25% Triton X-100). Slices containing LY-filled astrocytes were then placed in working buffer (WB; PBS containing 0.3% normal goat serum, 0.1% cold water fish gelatin, 0.125% Triton X-100) containing either 7 g/ml EphA4 or 1:200 N-CAM antibody for 48 hours. Slices used in the somata distribution experiment were placed in WB containing 7 g/ml EphA4 or 1:200 N-CAM and 1:200 anti-S100. The slices were washed three times in WB for 10 minutes each and then placed in WB containing secondary antibodies at a concentration of 1:100 for 24 hours. For studying astrocyte morphology near boundaries, astrocytes near the EphA4 boundary were filled with LY, and astrocytes near the N-CAM boundary were filled with AlexaFluor 568. EphA4 was subsequently detected using goat anti-rabbit Cy5, and N-CAM was detected using goat anti-rat AlexaFluor 488. In S100-labeled slices, N-CAM was detected with AlexaFluor488, EphA4 was detected with FITC, and S100 was labeled with either Alexa568 or Cy5, respectively. Slices were washed in PBS three times for 10 minutes each. Slices were coverslipped using Gelvatol (Harlow and Lane, [1988]) and allowed to set overnight at room temperature before they were examined. Donkey serum was used throughout the procedure for double-labeled specimens.Image acquisition and analysisSpecimens were examined using a Radiance2000 laser scanning confocal system (Bio-Rad, Hercules, CA) attached to a Nikon E600FN microscope (Kanagawa, Japan). A 60 oil immersion (NA 1.4) objective was used to image LY-filled astrocytes, and a 40 oil immersion (NA 1.3) objective was used to image S100 double-labeled slices.Image visualization and analysis were performed using the program Imaris 2.7 (Bitplane, Zurich, Switzerland). Baseline subtraction and linear contrast stretch functions were performed on volumes to enhance contrast. Final images were prepared using Adobe Photoshop 7.0 (San Jose, CA). Images of astrocytes near boundaries were constructed by combining an average intensity projection of either EphA4 or N-CAM labeling with a maximum intensity projection of the LY- or AlexaFluor 568-filled astrocyte.Histograms and graphs were generated using KaleidoGraph (Synergy Software, Reading, PA). All results are provided as mean SEM. Linear weighted sum (LWS) equals P (count)dp. The degree of polarization (P) was calculated by measuring the maximum extent of processes from the center of the soma toward the pia and toward the stratum granulosum and then dividing the larger value by the smaller. Astrocytes with longer pia-directed processes were given a positive value, and astrocytes with longer stratum granulosum-directed processes were given a negative value. Astrocyte spatial arrangement was tested for nonuniform distribution by means of a bootstrap procedure (Romano, [1989]). Briefly, the calculated Cramr-von Mises (CvM) goodness-of-fit value for the empirical data was compared with the CvM value obtained from 10,000 pseudo-samples (each with a sample size equal to tested dataset), each randomly generated by drawing from the null (uniform) distribution. The resulting P value equals the number of pseudo-samples having CvM values greater than the CvM value of the actual sample, divided by 10,000.
Imaging product type
Optical section
The z value was taken from the header file; it is not known whether this parameter is correct.
Z resolution
0.187 um